First of all, I’d like to congratulate Lauren and Matt on getting hitched – Yay! And secondly, I want to show off the super cute bunting I made for their wedding.
It was a good ol’ fashioned country wedding, so I went all out ‘barn dance’ with my fabric choices.
This bunting really is easy peasy to make! Not a lot is needed just some good-sized scraps of material, twine, a ruler, card, and scissors or, if you’re looking for precision, rotary cutters. To assemble I used a sewing machine, but you could probably use a glue gun if you don’t sew.
My first job was to decide which size bunting I wanted, I then made a flag template using a cereal box and used it to cut out all my fabric flags.
Once everything was cut out, I started sewing the flags on to lengths of twine using a zig zag stitch. To do this I placed each flag right side down on the machine, laid the twine over the top edge of the fabric, folded the top edge over and stitched. Simples, right?
Till next time x
Planes, trains, restaurants…and toddlers! That’s the stuff nightmares are made of. Or at least it was until I made this simple little roll up chalk mat! It’s a chalk board on one side, ideal for drawing and scribbling, and a place mat on the other. Perfect for a busy toddler on the go. And the best part is that you don’t need to be a sewing genius to make it.
You will need:
- Chalk board fabric
- Backing fabric (I used a wipe clean fabric)
- Bias binding tape
- Adhesive glue spray (I used a carpet/vinyl spray adhesive from my local carpet retailer)
- Usual sewing supplies (thread, sewing machine, etc.)
How to do it:
- Cut out the chalkboard fabric to the desired size and use this as a template for the backing fabric
- Glue the wrong sides of chalk board fabric and backing fabric together
- Pin bias tape around all edges. Tuck under ends to conceal the raw edges and stitch through all thicknesses
Here’s a tip: Test your stitches on scraps of fabric before you begin, adjust the thread tension if necessary until the stitches
play nicely. This is a lesson I learnt the hard way.
- Sew a ribbon on the edge of the place mat
- Prime the chalk board fabric by rubbing chalk all over the surface and then erasing it
Give it to your toddler, and enjoy some peace and quiet, yay!
Yes my friends, I’ve made some more peg bags! What can I say? I just love, love, love giving these away as gifts! They are super duper easy to make and look so lovely. If you would like to make one/some, here are the instructions. Okay, let’s take a look at the trio…
Bright red with white polka dots made for Marieclare:
Dogs with green and white polka dots made for my lovely step mum, Ellen:
Baking with green and white stripes made for Jayne:
What was that you said? Not quite enough peg bags for you? Well, you can feast your eyes on a ‘cats and spots’ version here and an ‘elephant’ version here.
Alright, I’ll give the peg bags a rest for now or at least until after Christmas anyway!
I made an apron as a birthday present for my nephew, Alfie. Not only will it make baking even more fun for him, but it’ll also protect his clothes from cruddy food stains. Happy nephew and happy parents = double brownie points for Auntie Kellita! And it was so easy and quick to make that I made one for Henry too. Aww, matching cousin aprons everybody. Throw in some baking supplies and this really is the perfect present for any budding toddler chef, so with Christmas just around the corner – yep, the C-bomb already – I thought I’d show you how to make one too.
Henry modelling his apron.
To make the apron you will need:
- Cotton fabric 40cm wide x 42cm long
- A metre and a half of 30mm twill tape
- The usual sewing paraphernalia
Step 1: Fold the fabric in half lengthways and cut a small curve across the corner, from approx. 10cm in from the top open side to approx. 23cm down.
Step 2: Fold over 1cm hem twice all the way around, press and secure with pins.
Step 3: Cut the twill tape into three lengths of 50cm.
Step 4: Tuck a strap into the hem on either side of the waist (at the bottom of the curve) and secure with a pin.
Step 5: Tuck the end of the neck strap into the hem on either side of the top of the apron and secure with a pin.
Step 6: Top stitch all the way around the apron, close to the edge, stitching through all thickness as you reach each strap. Repeat further in, so you have two rows of top stitching, and press.
Step 7: Hem the ends of the ties to stop them from fraying.
Here’s another great idea for a present and, if you enjoyed this post, I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter or Facebook. Thank you.
Since Henry graduated to his big boy bed, I’ve been hankering to get him some more grown up wall art for his bedroom. This presented me with a bit of an issue as I’m not allowed to spend any more money. None, whatsoever, Jon said so. And I also have no paint skills. None, whatsoever, Mr Pledge said so. But, after watching one too many 60 Minute Makeovers (I’m on maternity leave, remember), I decided to unleash my inner artist and try my hand at a masking tape art project. This was such an easy and cheap way to update the room of my ever-changing toddler that I thought I’d share it with you.
All you need is a canvas, some masking tape and paint in your choice of colours. I used three Dulux Feature Wall tester pots from Homebase, which were on offer.
Use the tape to create a pattern, I taped on stripes but you could easily create chevrons or something more abstract.
Paint in your choice of colours and peel off the tape carefully. Et voila, art!! Henry squealed he was so happy, then he asked for matching underpants, whatever next.
When you’re living life in shoestring alley (AKA maternity leave) buying an expensive bedding set for your child can feel a bit frivolous! So it was the extortionate cost of cotbed bedding that set me on my little duvet adventure. If you can sew in a straight line, you can make your toddler a duvet set, at least this is what I told myself! And if I can do it, so can you…
What you need:
Two pieces of cotton fabric measuring L58cm x W125cm
One metre of 30mm twill tape for the ties
The gingham fabric I loved wasn’t wide enough to reach these measurements, so I sewed a block colour piece along a raw edge of each piece of fabric with a 1/2 inch seam allowance, to get to the right measurement.
Place the right sides, the sides that are meant to be seen, of each piece of fabric together and pin. Sew along three of the sides with an approximate ¼ inch seam allowance, leaving one of the width sides open. Clip the corners and then zigzag stitch raw edges and trim.
Turn your duvet cover right side out and iron. Make a double hem across the opening by turning 1 inch to the wrong side twice and then pinning it in place.
Cut the twill tape into four pieces, to make four 25cm long ties.
Measure 50cm from each side and tuck a tie into the hem top and bottom, then pin into the hem to secure. Stitch along the entire hem, stitching through all thickness as you reach each tie.
Hem the ties.
And finally, top stitch 25cm in from either side across the bottom of the duvet cover through both layers. This will help to keep the duvet in its place.
So there it is, you’re very own cotbed duvet cover in six easy steps.